Cooking Performance Group SOE100A 매뉴얼 - 페이지 4

{카테고리_이름} Cooking Performance Group SOE100A에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cooking Performance Group SOE100A 18 페이지. Electronic steam oven

Technical Training

1.2. - Study of cooking

A cooking includes four different stages:

Ø Air saturation with steam - rise in temperature (step 0 and step 1)

This first phase lasts ten minutes. The thermoelectric activator is on and closes the flap valve.

The generator heats up for two minutes before the pump is activated.

The generator is temperature-regulated by the probe.

Ø Maintaining steam and temperature (step 2)

The pump is powered. The generator is powered every 12 seconds, and for 10 seconds this period

varies according to the temperature read by the probe, the instruction being for from 127 to 129°C.

Little steam is generated, but the position is maintained until three minutes before the end of the

cooking, thus enabling losses to be compensated while keeping the cavity saturated with steam.

Ø Steam evacuation and lowering of the temperature (step 3 and step 4)

Three minutes before the end of the cooking process, the thermoelectric activator and the pump are no

longer powered, and no further steam is created. Not being powered, the thermoelectric activator

retracts, opening the flap. The flow of air generated by the turbine "draws the steam" out of the cavity,

avoiding a great cloud of steam emerging when the door is opened, which could appreciably reduce

the temperature of the oven.

At the start of this phase, for 2 minutes the generator is powered every 24 seconds, and for 24

seconds.

For the last minute, the heating cover and the ventilator are working.

Ø Keeping the contents hot (step 5)

This phase enables the food to be kept hot; just the generator, the heating cover and the ventilation are

working.

The generator is powered every 24 seconds, and for 20 seconds

Keeping the food hot goes on until the door is opened.

T°C

Step1

Steam saturation

Step 2

Steam maintaining

STUDY OF

COOKING

Step 3

Step 4

Steam evacuation

Step 5

Keeping warm