Austlift 103901 사용자 설명서 - 페이지 5

{카테고리_이름} Austlift 103901에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Austlift 103901 8 페이지. Weld on point compact

•

Positioned so that it cannot cause any damage to the

product or other parts of the equipment to which it is welded.

•

The use of this product can not cause any injury to persons

operating equipment.

•

Cannot cause any unintentional unhooking when in use.

•

Placed in a position so that it can be easily hooked and

unhooked safely.

•

The product does not hinder any operation e.g. lifting or

excavation.

•

If this product is used for an excavator it should be welded

in the middle upper part of the bucket.

•

taken into service.

Welding

1. Material

Take note of the tensile strength of supporting material

to weld to. The following is a guide to determine the

correct height, length and thickness to ensure the right

strength of support material in mild steel.

2. Electrodes

Any welding of this product should be carried out by a

low alloy or non-alloy steel.

Electrodes must be free from any moisture and wire free

from rust before any kind of welding is to be carried out.

Recommended welding electrode; AS/NZS 1553 or equivalent.