Dato F500 빠른 작동 매뉴얼 - 페이지 5

{카테고리_이름} Dato F500에 대한 빠른 작동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dato F500 11 페이지. Smart thermostat

Modes

The thermostat had five modes: EM HEAT, HEAT, OFF, AUTO, COOL.

* Note: EM HEAT can be activated in FACTORY SET.

Press the options under mode bar to switch among EM HEAT (should be

activated if needed), HEAT, OFF, AUTO, or COOL.

Fan Modes

The fan can be set to AUTO mode or ON

mode.

During AUTO mode, the

fan will run based on the working condition of the compressor. If the

compressor is on heat or cool, the fan will be ON. If the compressor doesn't

work, the fan will be OFF.

During ON mode, the

fan will always be ON.

Press the options

under Fan bar to switch between AUTO and ON.

Set target temperature

The target temperature can be set by pressing + or - icon on the main interface.

Set Date&Time

Press Menu, then the screen displays DATE TIME, then press Edit. Once the

screen displays SETUP YEAR first, press + or - to set the current year, then

press Next to switch to SETUP MONTH. Press + or - to set the current month.

Press Next to switch to SETUP DATE, press + or - to set the current date, then

press Next to SETUP HOUR. Press + or -to set the current hour, then press

Next to SETUP MINUTE, press + or - to set the current minute. After setting,

press Done to exit and switch to the next setting.

Note: During Date & Time setting, press Menu or Done to exit the current

setting.

Function & Settings