Austlift 915100 사용자 설명서 - 페이지 10
{카테고리_이름} Austlift 915100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Austlift 915100 16 페이지. Roofer's kit basic
페이지 인쇄CALCULATING FALL CLEARANCE
Fall clearance is the vertical distance below the anchorage point to the first of
impact.
GENERAL CALCULATION
(FC)
Fall Clearance
(FFD)
Free Fall Distance
(SA)
Maximum length of extended
shock absorber
(WH)
Height of Worker
(SF)
Safety Factor
As per AS/NZS 1891.4 the
Fall Clearance (FC) can be
reduced by limiting the
free fall distance (FFD) and
reducing the amount of
shock absorber tear out (SA)
Fall Factor 0 indicates that you have reduced as much free fall distance as
possible by attaching your lanyard above.
Fall Factor 1 indicates your anchor point is at the same level as your attachment
point on the harness. This means that you will potentially fall the full length of
your lanyard (2m on a 2m lanyard).
Fall Factor 2 is the worst case scenario, where you are anchored at your feet.
This means you will fall up to twice the length of your lanyard. A total of 6.75m
clearance would be required when using a 2m lanyard.
1300 100 120
10
AUSTLIFT ROOFER'S KIT
FC = FFD + SA + WH +SF
Maximum length: 2m
1.75m for standard unit
1.95m for 150kg unit
Average: 1.7m
Minimum: 1m
FFD - Free Fall
Distance
600mm
1000mm
1500mm
2000mm
www.austlift.com.au
SA - Shock
Absorber Extension
300mm
500mm
600mm
900mm