4RF Aprisa SR+ 매뉴얼 - 페이지 5
{카테고리_이름} 4RF Aprisa SR+에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 4RF Aprisa SR+ 12 페이지. Demo kit
4RF Aprisa SR+에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Equipment List
The following equipment is required to perform the tests and demonstrations as described in this
document.
Hardware
1. Aprisa SR+ Demo Kit
2. Laptop or PC
3. IP Camera (optional extra – to purchase please contact your 4RF representative)
Software
The software required for the demonstration has been provided on the included USB Flash Drive.
1. Web Browser (Internet Explorer)
2. Advanced HMI 4RF SR+ SCADA Demo
3. Terminal Emulator (HyperTerminal or Putty)
Warning:
On low capacity radio based IP networks used for SCADA, general network broadcast traffic can overload
the radio communication channel. This broadcast traffic may come from servers, laptops, and other
network devices e.g. DHCP requests, DNS traffic, NetBIOS traffic, and ARP requests.
Low capacity radio networks must be isolated from other LANs such as main SCADA and corporate LANs
using routers to block traffic not intended for the SCADA radio network.
This needs to be considered when demonstrating and testing the Aprisa SR+ radios.
Aprisa SR+ Demo Kit Guide 1.3.0
Introduction | 5