4RF Aprisa XE 기술 문서 - 페이지 6

{카테고리_이름} 4RF Aprisa XE에 대한 기술 문서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4RF Aprisa XE 15 페이지. Radio link
4RF Aprisa XE에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

2.3.

Network

Selecting a Network clocking source is a two step process. First the radio must be set to Network clocking.

Then an interface must be configured as the network clock input.

Select "Network" from the Clock Source drop down box. Once selected, click on the "Apply" button.

Figure 4 : External Clocking Option

The next step involves selecting the external interface that the radio is to clock from, be it an E1/T1 or

HSS port.

Before setting up network clocks the cross-connect application must be started and a cross-connect

between the ports you wish to use as external clocks established.

Once cross-connections are made navigate to the interface page and select the card and then port which

you want to clock from, as shown in the figures below.

Figure 5 : Interface Summary menu

Select the slot of the card which you want to make the network clock source. Click on "Configure

Interfaces" button once selected.

Aprisa XE Clocking Technical Paper

6 | 15

Issued by: 4RF Customer Services 15 January 2009