AUSTRALIAN MONITOR XRS10 B 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} AUSTRALIAN MONITOR XRS10 B에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR XRS10 B 13 페이지. Powered and passive loudspeakers xrs series

AUSTRALIAN MONITOR XRS10 B 설치 및 운영 매뉴얼
MOUNTING & ACCESSORIES
MOUNTING
When mounting via a bracket or eyebolts the following must be considered.
The mounting of a permanently installed speaker may be dangerous unless undertaken by a qualified
professional with the required experience.
Walls and mounting surfaces must be capable of safely and securely supporting the load of the speaker and
bracketry.
Fixings must be safely attached to both the speaker and the wall or surface the speaker is to mount off. Fixings
must be fitted in accordance with the makers instructions.

Suspending with Eyebolts

XRS speakers have the ability to be hung from eyebolts. As many eyebolt locations as possible should be used
on the speaker. When mounting an XRS8 at least 2 or more mounting points should be used, for the XRS10 and
XRS12 3 or more points should be used. The best way to hang a speaker using eyebolts is to use two eyebolts
on the top of the speaker and one on the rear to give the speaker some angle.
All eyebolt fittings in the XRS range are M8, it is suggested to use a bolt with at least a 20 mm of thread length.
ACCESSORIES
XRS8
XR8PMA Pole mount adapter
XR8UMB Universal mounting bracket
XRS10
XR10CVR Heavy duty cover
AMISLSB1 Wall mount brackets
ATC303 Tripod speaker stand
ATC304 Heavy duty tripod speaker stand
ATC305 Winch up speaker stand
XR10-12UB Universal bracket
XRS12
XR12CVR Heavy duty cover
AMISLSB1 Wall mount brackets
ATC303 Tripod speaker stand
ATC304 Heavy duty tripod speaker stand
ATC305 Winch up speaker stand
XR10-12UB Universal bracket
XRS SERIES INSTALLATION AND OPERATION MANUAL
PAGE 7