AUSTRALIAN MONITOR MX61 설치 및 운영 매뉴얼 - 페이지 6
{카테고리_이름} AUSTRALIAN MONITOR MX61에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR MX61 12 페이지. 6 channel mic/line mixer
페이지 인쇄
INTERNAL ADJUSTMENTS
1
1
CHANNEL 1 ROUTING
If channel 1 is being used as a priority
input it can be routed so that the master
volume does not affect channel 1.
The default factory setting is pre master
fader meaning the master volume affects
channel 1 in the mix. The jumper header
is located mid way above channel 1 pot.
Move the jumper to link the two pins
nearer channel 8 to set channel 1 to post
master fader.
2
HEADPHONE ROUTING
The headphone level can be routed so
that it is affected by the master volume.
The default factory setting is pre master
fader meaning the master volume does
not affect the headphone volume.
The jumper header is located just behind
the front panel above channel 6 pot.
Move the jumper to link the two pins
nearer the inputs to set the headphone
to post master fader.
PAGE 6
3
3
OPTIONAL MODULES
The MX61 can have installed:
- a VCA module
- a Tone Generator module
- a Priority Muting module
See your local Australian Monitor dealer
for more information.
2
3
3
MX61 INSTALLATION & OPERATION MANUAL