AUSTRALIAN MONITOR TX6000 - BROCHURE 1 브로셔 - 페이지 2
{카테고리_이름} AUSTRALIAN MONITOR TX6000 - BROCHURE 1에 대한 브로셔을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRALIAN MONITOR TX6000 - BROCHURE 1 2 페이지. 6 channel mic/line mixer
페이지 인쇄Engineered and Distributed By AUDIO TELEX COMMUNICATIONS PTY LTD (
NSW Tel: (02) 9647 1411 Fax: (02) 9648 3698 VIC Tel: (03) 9890 7477 Fax: (03) 9890 7977 QLD Tel: (07) 3852 1312 Fax: (07) 3252 1237 WA Tel: (08) 9228 4222 Fax: (08) 9228 4233
TAS Tel: (03) 6228 6373 Fax: (03) 6278 1063 SA Tel: (08) 8352 4444 Fax: (08) 8352 4488 Export Enquiries: [email protected]
Frequency Response
Total Harmonic Distortion
Signal To Noise Ratio
Tone Controls
Bass @ 100Hz, Boost +12dB, Cut -12dB; Treble @ 10kHz, Boost +9dB, Cut -9dB
Inputs
The line inputs are dual female RCAs (47K Ohms). Maximum input level: 2.5V/10V
Input Sensitivity
Channel 6 line input is 200mV (for CD player or similar high level input)
Phantom Power
Outputs
Master output is via a 3 pin male XLR socket (1.5V @ 600 Ohms). Maximum output
level: +20dB. Mono headphone output via 1/4" socket (3.5V @ 600 Ohms).
Mono tape output via dual female RCA connectors (700mV @ 10K Ohms)
Controls
Level control per channel, Overall bass & treble controls, Master level control
Indicators
Power Sources
AC: 240V - 50Hz or 110V - 60Hz (special order), 3 pin IEC connector;
Power Consumption
Dimensions/Weight
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
The mixer shall have six dual mic/line inputs. The microphone inputs shall be active balanced and fea-
ture 3 pin female XLR sockets. The line inputs shall feature dual female RCA sockets.
Overall bass and treble controls shall be provided with front panel access. They shall provide 12dB cut
or boost at 100Hz and 9dB cut or boost at 10kHz. The master section shall include a master level con-
trol and a 7 segment output level LED meter. The master output shall be via a balanced 3 pin XLR male
socket. The tape output shall be via dual female RCA sockets whilst a 1/4" headphone socket shall be
provided on the front panel for monitoring purposes. The mixer shall have facilities for plug-in muting
cards as well as a 4 tone generator card.
The mixer shall be of high quality, suitable for both live and commercial applications. It should have
ample headroom and a frequency response of no less than 50Hz - 15kHz (±3dB). Total Harmonic
Distortion shall be no more than 0.08% at 1kHz. The S/N ratio shall be -78dB or better. Phantom power
shall be available to all microphone inputs and shall be switchable via an internal link. The unit shall be
packaged in a one rack unit rugged metal chassis suitable for desk or rack mounting.
The mixer shall be an Australian Monitor Installation Series model TX6000.
), 149 Beaconsfield Street, Silverwater, Sydney, NSW, 2128 Australia
ABN 78 001 345 482
-78dB (all channels at centre position)
6 dual mic/line. The mic inputs are active balanced with 3 pin XLR
female sockets (200-600 Ohms). Maximum input level is 100mV.
Mic: 0.6mV @ 200 Ohms; Line: 50mV @ 47K Ohms;
18V DC available on all mic channels (overall internal on-off link)
Power "on" LED, 7 segment LED meter on master output
DC: 24 Volts via 2.1mm DC socket
44mm H x 482mm W x 250mm D (Chassis Dimensions Only). 3kg
Website: www.australianmonitor.com.au
50Hz - 15kHz (± 3dB)
Less than 0.08% @ 1kHz
7 vA