Cookson FCF 사용 설명서 - 페이지 5

{카테고리_이름} Cookson FCF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cookson FCF 11 페이지. Firegard chain operator; firegard crank operator

OPERATOR MOUNTING

1. Before the operator is installed, verify that the door is properly operating and balanced.

2. Make sure the mounting plates are correctly positioned for RH or LH mounting.

3. Attach and tighten the mounting hardware to the mounting plate.

4. Tighten the operator mounting plate to the door.

5. When the operator is mounted on the bracket, be sure the door sprocket is properly aligned / in

the same plane with the operator drive sprocket before securing to the shaft.

6. The shelf or bracket must provide adequate support for the operator. Prevent play between

operator and door shaft. Permit operator to be fastened securely and with the drive shaft parallel

to the door shaft.

FireGard™ Chain and Crank