AUSTRAMAC FLASHCUT 1400 RM 운영자 매뉴얼 - 페이지 4

{카테고리_이름} AUSTRAMAC FLASHCUT 1400 RM에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSTRAMAC FLASHCUT 1400 RM 14 페이지. Diamond rock saw

SAFETY PRECAUTIONS:

WARNING!

Inappropriate use of rock saw may cause serious injury or death. It

is essential that operators read and follow all instructions in this manual. Operators

must complete an induction with approved AUSTRAMAC technician and prove they

are competent in use prior to handover. Pre start checks must be completed and the

machine maintained to ensure the safety of operators and others.

Prior to use the pre start check must be completed on the saw and

attachment points including the following:

a. Ensure the pickup and the quick hitch (or pins) are securely

attached to the rock saw.

b. Ensure the hydraulic hoses are secured and in good condition.

c. Ensure the water is attached and that there is adequate flow.

d. Ensure the guard is in the correct position and that it is secure.

e. Check the saw blade has no more than two segments in a row

missing and no more than 4 in total missing.

Ensure adequate cutting time is left on blade (minimum 3 mm).

Ensure blade bolts are tightened to 120Nm and flange bolts to140Nm.

h. Ensure that there is no play in excavator arm.

Operator must complete a test run prior to cutting.

Ensure that the work area is secure and that all persons are moved to a safe

distance.

Complete a survey of the site including all underground services,

overhead wires or other structures that may cause a hazard prior to operating

saw.

Ensure excavator is in stable secure position prior to operating saw.

Operator and others in immediate work area to wear appropriate face,

hearing and head protection at all times.