Austria Email EKL 150 작동 및 유지 관리 지침 - 페이지 5

{카테고리_이름} Austria Email EKL 150에 대한 작동 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Austria Email EKL 150 20 페이지. Pressure resistant electric water heater with control panel of the series

페이지 인쇄

FUNCTION

The water stored in the enamelled interior tank is heated by an electrical heater insert. A user-adjustable

knob is available to preset the desired temperature. At the times determined by the responsible power

supply company, the temperature controller automatically switches on the heating. Once the desired

temperature in the storage tank is reached, the temperature controller switches the heater off again. If

the water temperature drops, for instance because water is used up or as a result of natural cooling (an

effect that is minimised by the high-quality CFC-free PU foam insulation), the heating will switch on until

the preset storage water temperature is reached again.

If the storage tank is equipped with a heater battery (EKR), the water may be heated with the system's

water heater as an alternative to electrical heating.

HOT WATER REQUIREMENT

The hot water requirement of the household depends on the number of persons in the household, the

sanitary installations of the flat or house, the insulation, the piping and the individual user's habits.

The following table provides a list of standard consumption values for orientation.

Full bath

Shower

Washing hands

Hair wash (short hair)

Hair wash (long hair)

Use of bidet

Washing dishes

for 2 persons per day

for 3 persons per day

for 4 persons per day

House cleaning per bucket

of cleaning water

In this table, it was assumed that the temperature of the cold water required for mixing to the indicated hot

water temperature is approximately 12°C.

ENERGY SAVING

The high-quality CFC-free PU foam insulation and the fitted temperature control means that our electric

storage tanks are genuine energy savers.

Low storage water temperatures are especially economic. Therefore, the infinitely variable temperature

setting should be set to the lowest value that is actually required to cover the real hot water requirement.

This helps save energy and reduces the build-up of limescale deposits in the tank.

Hot water demand in

litres

at 37 °C

at 55 °C

150 - 180

30 - 50

3 - 6

6 - 12

10 - 18

12 - 15

Required storage water quantity in

litres

with 80 °C

with 60 °C

55 - 66

78 - 94

11 - 18

16 - 26

1 - 2

1,6 - 3,1

3 - 4,4

4,2 - 6,3

3,7 - 6,6

5,2 - 9,4

4,4 - 5,5

6,3 - 7,8

12,5

15,2

6,3

21,5

Id.Nr.: 228843-16