4Sight The Original Dash Cam 사용자 설명서 - 페이지 7

{카테고리_이름} 4Sight The Original Dash Cam에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4Sight The Original Dash Cam 9 페이지. 4sk98.1

THIS DEVICE SHOULD NOT BE ADJUSTED BY THE DRIVER WHILE

DRIVING. IN THE EVENT OF AN ACCIDENT, DEVICE MAY DISLODGE

AND BECOME UNSAFE FOR PASSENGERS.

Notice

1) Please insert memory card before recording

2) The Original Dash Cam supports memory cards up to 32GB

3) Please attach unit by applying firm pressure to mount before mounting on

surface.

4) Retro loop (video time) is one option under the video output menu. This

function allows the camera to keep filming even after memory full. When

retro looping is activated, old files will be overwritten one by one. In order to

prevent all videos being deleted at once, there are optional retro looping times

under the "video time" settings.

5) When the lithium battery is depleted, the Dash Cam™ screen shows "Batteries

depleted." The camera will shut down automatically after 20 seconds and save

the files automatically.

6) If you need to reset the Dash Cam™, press the RESET button for 3 seconds.

7) If device is displaying in another language, follow these steps:

a.) Power on device

b.) Press the Rec/Snap button to stop recording

c.) Press the "Menu" button (device enters "Video output" menu)

d.) Press the "Menu" button again (device enters "Setup" menu)

e.) Press the "Down" button once and then press the "Rec/Snap" button

this brings you to the "language menu"

f.) Use the "Up" or "Down" buttons until your desired language is

highlighted.

g.) Once your desired language is highlighted press "Rec/Snap" to set the

unit to the highlighted language.

8) For a larger manual size, please visit www.GetDashCam.com to download and

9) We are continually making improvements to our instruction manuals, the most

up to date version will always be posted on

Operational Tip:

If your Dash Cam™ is not working properly, please follow the below step:

Slightly press the RESET hole with a pin to have the unit restart and it should

resume functioning properly.