4smarts Eara TWS 사용자 설명서 - 페이지 9

{카테고리_이름} 4smarts Eara TWS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4smarts Eara TWS 13 페이지.

페이지 인쇄

V. Function notes

- Connecting both headphones with

stereo signal:

• Keep the multifunction button (5) of

both headphones pressed simul-

taneously until the status LED (6)

flashes blue and red alternately.

• Quickly double click the multifunction

key (5) of the right side headphone

(headphone with printed „R") or keep

it pressed 3 seconds.

• The connection is successful when

the status LED (6) of one headpho-

nes continues to flash red & blue

alternately (= Master headphone),

and the status LED of the other

headphone goes out (= Slave

headphone).

• Go to the Bluetooth settings of your

smartphone and search for following

device: 4smarts TWS

• After successful connection the

status LED (6) of both headphones

slowly flash up blue.

- Connecting only one headphone:

• Decouple the headphones from your

smartphone and repeat the process

with only one headphone. By doing

this you can save the battery power

of one headphone.

- Recharging the charger:

• Connect the plug of the supplied

cable (8) with the related charging

connector (4).

• The status LED (1) of the charging

station gives info about the battery

status of the charging station itself,

but not the headphones. It flashes

up red while charging and blue for

showing how much battery capacity

is left.

- Recharging the headphones:

• A low battery charge of the headpho-

nes is signalized by a warning sound

and the quick flashing up of the

status LED (6) in red color.

• You can recharge the headphones

with the supplied charging case (3)

or directly by connecting the supplied

cable (10) with the charging port (7)

of the headphone.

• Note: When connecting to a power

source, the headphoes will automati-

cally switch off.

- Switching on / switching off:

• For switching on both headphones

keep the multifunction key (5) of both

headphones pressed for about 3

seconds simultaneously.

• For switching off both headphones

keep the multifunction key (5) of one

of both headphones for more than 5

seconds pressed.