Benchmark USA 81011 소유자 매뉴얼 - 페이지 2

{카테고리_이름} Benchmark USA 81011에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Benchmark USA 81011 4 페이지. Professional cotton candy machine

1. Remove two bolts located on either side of extractor head. These bolts are used only for shipping and storage

purpose.

2. Locate three spring loaded mounting bolts and align with mounting brackets on bottom of bowl. Twist bowl to lock

into place on the body of the machine.

3. Attach dome to bowl with three screws provided.

1. Plug unit into a properly grounded 120 volt power supply.

2. Be sure to keep hands and loose clothing away from the spinning head.

3. Fill spinning head with desired amount of sugar floss (1/8 cup = an average cone)

4. Turn on MOTOR switch.

5. Turn on HEAT switch.

6. Once the head heats up floss will begin to melt and create cotton candy.

7. Using a paper cone collect the cotton candy from the edges of the bowl in a circular motion.

8. Repeat steps 3-7 until the desired amount of cotton candy has been produced.

9. Turn OFF motor and heat switches when finished making cotton candy.

1. Make sure unit is unplugged and has had time to cool down before cleaning. The ZEPHYR COTTON CANDY

MACHINE breaks down to – body, bowl, dome, and extractor head for easy cleaning.

2. After excessive build up of sugar in the extractor head, unplug the unit. Remove the extractor head by

disconnecting it from the unit. Allow the extractor head to soak in hot water for at least 15 minutes. Let dry and

replace on the unit.

3. Remove bowl and dome and wash with soap and water. Use wash cloth to wipe clean and let dry.

4. Use a slightly damp, non-abrasive sponge or non-abrasive towel to wipe clean the outside of the unit, wipe with a

non-abrasive towel to dry. Do not use excessive water when cleaning this unit.

Assembly Instructions

Wiring Diagram

Operating Instructions

Cleaning

Page 2