Benchmark USA 51026 소유자 매뉴얼 - 페이지 2
{카테고리_이름} Benchmark USA 51026에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Benchmark USA 51026 4 페이지. Professional chip warmer
페이지 인쇄
1. Remove any packaging materials.
2. Locate 4 Legs (p/n 6706) and install them on the underside of the Chip Warmer.
3. It is recommended to clean the Chip Warmer inside and out before initial use.
1. Plug the machine into a properly grounded 120 volt outlet.
2. Turn on the warming element with the front lighted switch.
3. Set the thermostat to High until the temperature indicator reaches the desired temperature.
4. Fill the Chip Warmer with up to 26 gallons of tortilla chips through the fill doors.
5. Adjust the thermostat accordingly to maintain the desired temperature.
6. Begin serving warm chips through the lower drop door.
7. Continue to load the machine with product through the fill doors.
8. Turn off machine when not in use.
Assembly Instructions
Diagram
Operating Instructions
Page 2
Cleaning