Brentwood Appliances KT-2017BK 작동 및 안전 지침 매뉴얼 - 페이지 6

{카테고리_이름} Brentwood Appliances KT-2017BK에 대한 작동 및 안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brentwood Appliances KT-2017BK 20 페이지. Cool-touch electric kettles

페이지 인쇄

3. Empty the water from the Kettle. Once cooled, rinse Kettle with

water.

4. Repeat process at least 2 times to ensure your Kettle is clean before

use.

Attention: First use may cause a slight odor or small smoking upon heating,

it is normal. This is a result of the heating element chemical reaction. It

quickly goes away.

Using Your Kettle:

1. Pull out the power cord from the base unit and connect it to a power

outlet.

2. Remove kettle from power base then open the lid to fill Kettle with

water.

CAUTION: Do not overfill the product or operate it when empty.

3. Close the lid. Wipe off any excess water on the bottom of the kettle

before placing it onto the base. Place the Kettle back onto the base

unit.

4. Turn the Kettle on by pushing the switch from "O" (off) to "I" (on). The

light on the Power Base will illuminate to indicate the Kettle is heating.

5. The Kettle will automatically switch off to the "O" position once the

water has boiled. The indicator light will also turn off.

Note: The power switch only works when the Kettle body is correctly placed

on power base.

6. Lift the Kettle from the base using its handle and pour out hot water

into your container.

Note: If you need to heat water again, let the appliance rest for 1 minute

before starting again.

7. When heating is complete, make sure the power switch is on the "O"

position, and then unplug the product from the electrical outlet.

Note: Always unplug the product from the electrical outlet when it is not in

use or unattended.

Cleaning Your Kettle:

WARNING: Always unplug the product and allow it to cool completely

before cleaning or storing it.