Bendcart BC-100 조립 지침

{카테고리_이름} Bendcart BC-100에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bendcart BC-100 5 페이지.

Remove all Cardboard

Review drawing on page 3 and 4 of instruction pack.

Pump Tray

Mount the pump tray by lowering the long bar down into the pump tray support

tube on the back of the Bendcart

Mount Bender Supports (2)

-remove the 3/8" bolts and spacers

-slide the bender supports over the frame top and cross member with the

support pins pointing away from the saddle and shoe storage posts

-reinstall spacers and bolts

-tighten bolts

Mount Conduit Holdown wheel

- raise the follow bar support above the level of the rear wheels by turning the

adjustment handle

-remove the cotter pin and washer from the follow bar support tube

-slide the conduit holdown wheel assembly onto the follow bar support tube

and reinstall the washer and cotter pin. Bend the ears of pin to secure.

Bendcart BC-100 assembly instructions