aFe Power 440-401006-N 사용 설명서 - 페이지 8
{카테고리_이름} aFe Power 440-401006-N에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. aFe Power 440-401006-N 13 페이지. Heavy rate racing sway bar pillow mounts
페이지 인쇄
Install Rear End Links
Install one of the 80mm long end link assemblies onto each of the rear lower control
arms. Use a 15mm open end wrench on the flats of the heim joint stud to prevent it from
rotating as you tighten the nut using an 18mm socket. Torque to 76 N-m (56 ft-lbs).
OTE: To prevent thread galling, do not use a high-speed driver such as an
impact gun on the flange nut. Only tighten by hand and torque to spec.
8
00P-0T1027-A