4x4 TOUGH 17-031000 사용 설명서 - 페이지 5

{카테고리_이름} 4x4 TOUGH 17-031000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4x4 TOUGH 17-031000 12 페이지.

INTRODUCTION

This Jump Starter does not have, nor does it require a battery. In place of a battery this

Jump Starter is equipped with capacitors temporarily able to store su cient electrical

charge to allow a vehicle to be started.

The charge input for the capacitors may be from a vehicle lacking su cient battery

charge to start the vehicle, a healthy battery in a normally functioning vehicle, a 12V DC

outlet or a USB outlet.

Typically a normally functioning vehicle battery carries a charge of 12.2 volts. Should the

voltage of the battery fall below 10.6 volts, it is unlikely the battery will have su cient

charge to start a vehicle.

In most cases the capacitor Jump Starter can be charged from a depleted battery. It may

also be charged from an independent power source. The Jump Starter does not have to

be pre-charged; it is charged "there and then" as the situation arises.

This product is intended for private vehicle use only, and is not intended for commercial,

trade or industrial use.

CONTENTS

1 x Jump Starter

1 x DC cable

1 x USB cable

1 x Instruction manual

1 x Warranty card

SPECIFICATIONS

Cranking Current:

Capacitors:

Working Temperature:

Approx. recharge time from a healthy battery:

Approx. recharge time from 12V socket:

Approx. recharge time from USB:

Weight:

Maximum Successive Start Attempts in a Session

Minimum Rest Period between Sessions

Up to 450A DC 12V

2.7V 500F x 5 Pieces

-20 to 60 degree C

60 seconds

3-4 minutes

30-40 minutes

1.30kg

5 times

5 minutes