BENDIX INLET REG VALVE COMP 매뉴얼
{카테고리_이름} BENDIX INLET REG VALVE COMP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX INLET REG VALVE COMP 6 페이지. Inlet regulating valve for compressors
페이지 인쇄®
Bendix
Inlet Regulating Valve or IRV
®
OUTLET FLANGE
(MATES TO
COMPRESSOR INLET)
OUTLET
SAFETY
VALVE
FIGURE 1 - COMPRESSOR INLET REGULATING VALVE
OUTLET
VALVE
SPRING
SAFETY
VALVE
FIGURE 2 - INLET REGULATING VALVE
DESCRIPTION
The IRV
inlet regulating valve is intended for use on
™
multi-cylinder compressors which receive their induction
air supply from the pressure side of the engine turbocharger.
The IRV
™
valve may not be used in conjunction with single
cylinder compressors including the Bendix
compressor. Generally mounted directly at the compressor
BODY
EXHAUST PLUG
BX-2150
®
for Compressors
™
VENT
MOUNTING
HOLE
TURBOCHARGER
SUPPLY PORT 3/4" NPT
air inlet, the IRV
inlet pressure to 10 psi or less.
The cast aluminum body incorporates an outlet flange which
is capable of mating with all Bendix compressor inlet flanges
except that of the Tu-Flo
pipe thread in the IRV
™
to the engine induction system or turbocharger. High
O-RING
O-RING OR
VALVE &
U-CUP
PISTON
PISTON
ASSEMBLY
HOUSING
O-RING
VALVE
O-RING
VALVE SEAT
O-RING
SPRING
SPACER
O-RING
CAP NUT
TURBOCHARGER
SUPPLY PORT
valve is designed to regulate compressor
™
300 compressor. A 3/4 inch female
®
™
valve cap nut facilitates connection
MOUNTING
HOLE
1