BENDIX MV-3 DASH CONTROL MODULE 매뉴얼
{카테고리_이름} BENDIX MV-3 DASH CONTROL MODULE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX MV-3 DASH CONTROL MODULE 6 페이지. Dash control module
페이지 인쇄
®
®
™
Bendix
MV-3
MOUNTING
PLATE
™
FIGURE 1 - MV-3
DASH CONTROL MODULE
DESCRIPTION
The Bendix
®
MV-3
™
dash control module is a two-button,
push-pull control valve housed in a single body which includes
a dual circuit supply valve and a check valve. The MV-3
valve can duplicate the functions of any existing two or three
valve push-pull system and has the advantages of reduced
plumbing.
™
The MV-3
valve body, plungers and spools are made out of
a non-metallic, non-corrosive material. All air connections
are at the back of the valve with the exception of the optional
auxiliary port as shown in Figure 1.
™
The MV-3
valve provides the following functions:
1 - Tractor Protection.
2 - Trailer Service Air Control.
3 - System Park.
4 - Trailer Park Only.
5 - Trailer Charge with Tractor Spring Brakes Applied (Tractor
Park Only).
6 - Supply Reservoir Selection.
7 - Primary & Secondary Reservoir Connections.
Dash Control Module
TRAILER
DELIVERY
MOUNTING
HOLES
(4)
SECONDARY
SUPPLY
TRACTOR
DELIVERY
AUXILIARY
PORT
(OPTIONAL)
TRAILER
DELIVERY
EXHAUST
™
AUXILIARY
DELIVERY
PORT
DELIVERY
TRAILER
SUPPLY
LINE
TRACTOR
PROTECTION
FIGURE 2 - MV-3
CONNECTIONS
DUAL CIRCUIT
SUPPLY
VALVE
PRIMARY
SUPPLY
BOTTOM VIEW
TRACTOR SERVICE
RESERVOIR #1
EXHAUST
PORT
SUPPLY
#2
TRACTOR
SERVICE
VALVE
RESERVOIR #2
™
DASH CONTROL MODULE AIR
TRACTOR
DELIVERY
SECONDARY
SUPPLY
SUPPLY
#1
DELIVERY
TRACTOR
SPRING
BRAKES
1