4xem E200DNWV 사용자 설명서 - 페이지 8
{카테고리_이름} 4xem E200DNWV에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4xem E200DNWV 12 페이지. Ip dome cameras
페이지 인쇄Mount The Camera
There are two ways to mount the camera.
Mount the camera on wall through camera holder (bracket)
1.
Embed the camera into ceiling
2.
Caution:
If you want to mount the dome to wooden wall, make sure the wood thickness is
not less than 1/2 inch (1.3 cm).
Hang The Camera on Wall with Camera Holder
The camera has a hole of 1/4" on the bottom cover, for camera
holder mounting application:
Get the camera holder
1.
Mount the camera holder onto the desired place by following the
2.
instructions given by the holder manual
Get the camera body and mate the hole on its base to the screw on
3.
the camera holder.
Turn the screw all the way in until it stops. Keep screw a little loss until
4.
the step 5 is finished
Rotate the camera to find the best direction so that wires will not be
5.
bended during the wiring work
Tighten the screw now
6.
.
User's manual
(bracket)
8
.