BENDIX DOUBLE ANCHOR PIN CAM BRAKE 일반 설명 매뉴얼 - 페이지 4
{카테고리_이름} BENDIX DOUBLE ANCHOR PIN CAM BRAKE에 대한 일반 설명 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX DOUBLE ANCHOR PIN CAM BRAKE 12 페이지. Double anchor pin cam brake
페이지 인쇄
FIGURE 3 - REMOVING CAM ROLLERS
FIGURE 4 - REMOVING SHOE RETURN SPRING
FIGURE 5 - REMOVING SHOES
4
FIGURE 6 - REMOVING SLACK ADJUSTER
FIGURE 7 - REMOVING ACTUATOR BRACKET
PREPARATION
1. Park vehicle on a level surface and prevent movement
by means other than the brakes.
2. If equipped with spring brakes, cage the spring on all
axles to be worked on.
3. Drain air from all reservoirs.
4. Raise the axle, to be worked on until the tires clear the
ground.
5. Turn the slack adjuster adjusting screw in the opposite
direction used to adjust the brakes until the cam rollers
return to the start position on the S-cam.
6. Remove wheels and drums using the procedures specified
in the vehicle maintenance manual.