BENDIX TLV-9000 서비스 데이터 - 페이지 8

{카테고리_이름} BENDIX TLV-9000에 대한 서비스 데이터을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX TLV-9000 8 페이지. Lift axle valve

TROUBLESHOOTING

For situations with the TLV-9000

in the lift axle stuck in either the raised or lowered position,

please refer to the following Bendix Service Data sheets

available at bendix.com:

SD-13-47671 (Bendix

Channel) - Sections G and H

SD-13-47672 (TABS-6 Advanced Multi Channel) -

Sections H and J

REMOVAL

1. Identify and mark or label all air lines and their

connections to the TLV-9000 lift axle valve. Then

disconnect the air lines and the electrical connector.

2. Remove the TLV-9000 valve from the vehicle. Retain

the mounting hardware.

Log-on and Learn from the Best

On-line training that's available when you are 24/7/365.

lift axle valve that result

™

TABS-6

Advanced Single

™

Visit brake-school.com.

1. Install the TLV-9000 valve on the vehicle frame using

the two M8 x 60 screws that were retained in the

removal process. Torque to 19 ft-lbs.

2. Reconnect all air lines to the valve using the

identification made during removal.

3. Test all air fittings for leakage. Also, perform

OPERATIONAL AND LEAKAGE TESTS before placing

the vehicle back into service.