Active Ideas HOVR 매뉴얼 - 페이지 6

{카테고리_이름} Active Ideas HOVR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Active Ideas HOVR 8 페이지.
Active Ideas HOVR에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

• Only attach the desk mount to solid wood desk tops that are at least

1" in thickness.

• Please make sure that the legs of your desk are sturdy.

• Never stand or put all your weight on the HOVR when it is attached

to the desk mount.

Procure tools necessary for installation

1. Place one piece of double-sided

tape (K) on the top of your desk-

mount (I).

2. While seated, pull yourself up to

your desk to your ideal sitting

position.

3. With the hooks pointing towards

you, tape the desk mount on the

bottom of your desk or table directly

above and between your knees or

slightly in front of your knees if you

are over 5'10" feet tall.

4. Check the placement of your desk

mount to ensure it is straight.

5. Mark where the holes in the desk-

mount are located.

6. Remove the desk mount and the

tape.

7. Measure 5/8 inch in from the tip of

your drill bit and put tape around the

bit to mark depth of hole and make a

flag

8. Make 4 starter holes using your drill

at the marks. Be careful to only

make holes as deep as the tape flag

on your drill bit.

9. Hold the desk mount in place and

securely fasten ALL 4 screws.

Desk Mount Model

Important

1. Drill

2. Tape (scotch, masking, or duct)

3. Drill Bit (5/32 inch)

4. Phillips Head Screwdriver #02

5. Ruler (6 inch)