BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM 설치 지침 - 페이지 3
{카테고리_이름} BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM 4 페이지. Air power compressor
BENDIX BA-921 COMPRESSOR-STD-CLOSED ROOM에 대해서도 마찬가지입니다: 서비스 데이터 (17 페이지)
페이지 인쇄
6. Once the gear is removed, thoroughly clean the gear
and inspect it for any physical damage. See Figure 6.
Figure 6 – Clean and Inspect the Gear
7. Secure the remanufactured compressor with the
crankshaft oriented upward, and carefully place the
salvaged drive gear on the crankshaft ensuring it is
square. See Figure 7.
Figure 7 – Place the Drive Gear on the Crankshaft
8. Replace the lock nut and hand tighten counter-clockwise
(this is a left-hand threaded lock nut). See Figure 8.
Figure 8 – Replace the Lock Nut
9. Once the lock nut is
wrench to secure the lock nut to 165-200 ft-lbs
(220-280 N•m). Ensure the crankshaft is secure while
torquing the lock nut.
Figure 9 – Secure the Lock Nut
10. Reinstall the compressor – and any fittings that were
removed – per the engine manufacturer's specifications.
snug, use a torque
See Figure 9.
3