BENDIX BDW46 지침서 - 페이지 13

{카테고리_이름} BENDIX BDW46에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. BENDIX BDW46 20 페이지.

페이지 인쇄

Maintenance and cleaning

Clean the external surfaces of the machine and control panel

with a damp soft cloth. If necessary use only neutral

detergents. Never use abrasive products, scouring pads or

solvent (acetone, trichloroethylene etc....).

Ensure that the seals around the door, the detergent and rinse

aid dispensers are cleaned regularly with a damp cloth.

We recommend the use of Finish Dishwasher Cleaner every

3 months or run a 65°C wash programme without dishes using

detergent.

Regular use of Finish Dishwasher Cleaner cleans

inaccessible parts, eliminates unpleasant food odours and

helps prevent the build-up of limescale.

Cleaning the filters

The filters must be checked and cleaned from time to time.

Dirty filters will degrade the washing result.

1. Open the door, remove the lower basket.

2. The dishwasher filter system comprises a coarse filter (A),

a microfilter (B) and a flat filter (C).

Unlock the filter system using the handle on the microfilter,

and remove.

3. Turn the handle about

MA39

4. Take hold of the coarse filter (A) by the handle with the hole

and remove from the microfilter (B).

5. Clean all filters thoroughly under running water.

6. Remove the flat filter (C) from the base of the washing

compartment and clean both faces thoroughly.

7. Put the flat filter (C) back in the base of the washing

compartment.

8. Place the coarse filter (A) in the microfilter (B) and

press together.

9. Put the filter combination in place and lock by turning the

handle clockwise to the stop. During this process ensure

that the flat filter does not protrude above the base of the

washing compartment.

a turn anticlockwise and remove.

Attention!

Under no circumstances may the dishwasher be used without

filters.

Incorrect repositioning and fitting of the filters will produce

poor washing results.

NEVER try to remove the

upper spray arm.

If residues of soil have

clogged the holes in the

upper spray arm, remove

them with a cocktail stick.

Prolonged periods of non-operation

If you are not using the machine for any period of time you are

advised to:

1. Unplug the appliance and then turn off the water.

2. Leave the door ajar to prevent the formation of any

unpleasant smells.

3. Leave the inside of the machine clean.

Frost precautions

Avoid placing the machine in a location where the temperature

is below 0°C. If this is unavoidable, empty the machine, close

the appliance door, disconnect the water inlet pipe and empty

it.

Moving the machine

If you have to move the machine (moving house etc....):

1. Unplug it.

2. Turn the water tap off.

3. Remove the water inlet and discharge hoses.

4. Pull the machine out together with the hoses.

Avoid over tilting the machine during transportation.