dymax BlueWave 200 사용자 설명서 - 페이지 8
{카테고리_이름} dymax BlueWave 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dymax BlueWave 200 16 페이지. Handheld diaphragm valve
dymax BlueWave 200에 대해서도 마찬가지입니다: 빠른 시작 지침 (2 페이지), 빠른 시작 지침 (2 페이지), 빠른 시작 지침 (2 페이지), 빠른 시작 지침 (2 페이지)
페이지 인쇄8
Model 200 Dispensing Valve User Guide
Fluid
The Model 200 diaphragm valve requires a material reservoir or pressure tank to draw
material from. The material reservoir should be connected to the Model 200 through
the 1/8" NPT port located on the Delrin® fluid section of the valve. Typically material is
fed into the valve through 3/8" O.D. tubing. Depending on material viscosity, dispense
tip size, and desired flow rate, the valve can dispense material with less than 15 psi.
Figure 3. Model 200 Plumbing Diagram
Diaphragm Actuation
When the lever is depressed to lift the plunger, the diaphragm will flex under fluid
pressure to allow the valve to open and dispense fluid. When the lever is released, the
spring will again force the plunger into the diaphragm to return the valve to the closed
position.