dymax BlueWave 200 사용자 설명서 - 페이지 9

{카테고리_이름} dymax BlueWave 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dymax BlueWave 200 16 페이지. Handheld diaphragm valve
dymax BlueWave 200에 대해서도 마찬가지입니다: 빠른 시작 지침 (2 페이지), 빠른 시작 지침 (2 페이지), 빠른 시작 지침 (2 페이지), 빠른 시작 지침 (2 페이지)

페이지 인쇄
Figure 4. Model 200 Actuation Illustration

Operation

Start Up

At the beginning of the day or a shift, it is necessary to properly start the Model 200 to
begin normal operation. To start the dispensing valve, follow the instructions below.
Refer to Figure 1 for part references.
1.
Remove the Luer Lock Plug from the Luer Adapter (I) and discard.
2.
Place a new Dispense Tip onto the Luer Adapter (I).
3.
Apply fluid pressure to the valve by turning on the pressure to the Material
Reservoir.
4.
Cycle the valve to the open position to bleed all air that may have become trapped
when changing the Dispense Tip.
IMPORTANT: It is often necessary to orient the valve with the Dispense Tip pointing to
completely bleed all air from the Fluid Body and Tip.
Model 200 Dispensing Valve User Guide
9