Dymo 1570 사용 설명서 - 페이지 2
{카테고리_이름} Dymo 1570에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo 1570 2 페이지.
페이지 인쇄
Load Tape
1.
Expose 3" of the tape, open the tape compartment (A), and insert so that 'U' shape opening in the
tape cartridge points down. Insert the tape into the feed slot and thread forward until visible.
Close the tape compartment to lock in the tape.
Advance Tape
2.
By turning the feeder (B) or with several half-squeezes (squeeze until click sound is audible) of
the handle (F), advance the tape 1/4" past front of embosser.
Emboss Letters
3.
Turn the wheel (E) until the desired letter aligns with selector. Squeeze the handle (F) firmly and
repeat for each letter. To space between words, half-squeeze handle until click is heard.
DO NOT HOLD WHEEL WHILE EMBOSSING.
Cut Tape
4.
Squeeze the cutter (C) and remove excess tape from the end of the embosser.
Apply Label
5.
Pull the end of the tab to strip the backing. Apply tape to a clean dry surface.
Change Wheel
6.
Push wheel right to left and remove. Snap in the new wheel.
DO NOT SQUEEZE HANDLE WHILE CHANGING WHEEL.