Dymo 18143 사용자 설명서 - 페이지 8

{카테고리_이름} Dymo 18143에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo 18143 10 페이지. Electronic labelmaker

페이지 인쇄
LM150 WEUdef.qxd
Adjusting the Print Contrast
You can adjust the print contrast to fine tune
the print quality of your label.
To set the contrast
1. Press Extra.
2. Use the arrow keys to select Set Contrast
and press OK.
3. Use the arrow keys to select one of the five
contrast settings and press OK.

Caring for Your Labelmaker

Your labelmaker is designed to give you long
and trouble-free service, while requiring very
little maintenance.
Cleaning the Labelmaker
Clean your labelmaker from time to time to
keep it working properly.
To clean the cutter blade
1. Remove the tape cassette.
2. Insert the tip of a ball-point pen or pencil
between the L-shaped piece and the guide
pin.
Press and
hold cutter
3. Press and hold down the cutter lever to
expose the cutter blade.
23-09-2003
16:07
Insert tip
of pen
or pencil
Figure 9
Pagina 8
4. Use a cotton ball and alcohol to clean both
sides of the blade.
5. Release the cutter lever.
To clean the print head
Wipe print head clean using the cleaning tool
located inside the tape compartment lid.

DYMO D1 label cassettes

Width:
6mm
(1/8")
Length:
Black/Clear
43610
Blue/Clear
–––––
Red/Clear
–––––
Black/White
43613
Blue/White
–––––
Red/White
–––––
Black/Blue
–––––
Black/Red
–––––
Black/Yellow
43618
Black/Green
–––––
White/Clear
–––––
White/Black
–––––
Black/Silver
–––––
Black/Gold
–––––
Black/Fluo Green
–––––
Black/Fluo Red
–––––
Flexible Nylon
–––––
Perm. Polyester
–––––
UK Adapter
40075
European Adapter
40076
8
9mm
12mm
(1/4")
(1/2")
7m
7m
7m
40910
45010
–––––
45011
–––––
45012
40913
45013
40914
45014
40915
45015
40916
45016
40917
45017
40918
45018
40919
45019
–––––
45020
–––––
45021
–––––
45022
–––––
45023
–––––
45024
–––––
45025
–––––
16957
–––––
16959