Dymo LabelManager 160 사용자 설명서 - 페이지 8

{카테고리_이름} Dymo LabelManager 160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelManager 160 11 페이지. User guide 1
Dymo LabelManager 160에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄
Dymo LabelManager 160 사용자 설명서

Adding Box and Underline Styles

You can highlight the text by adding a box or
underline style.
Five styles are available:
To add a box or underline
 Press
until the desired box or underline style
is displayed.
A label can be underlined or enclosed within a box, but
not both together.
When adding an underline on a two-line label, each line is
underlined. When adding a box on a two-line label, both
lines are enclosed in a single box.

Creating Vertical Labels

You can print labels with the text oriented vertically.
When printing two-line vertical labels, the label will print
with the second line of text after the first line.
To create a vertical label
Press
.
1
Enter text.
2
Press
to print.
3
The underline style will not print on a vertical label.

Creating Two-Line Labels

You can print a maximum of two lines on a label. Only one
line of text can be printed on 1/4" labels.
To create a two-line label
Enter text for the first line and press
1
The
symbol appears. This symbol is not printed.
Enter text for the second line.
2
Press
to print.
3

Caring for Your Label Maker

Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance. Clean your label maker regularly to keep it
working properly. Clean the cutter blade each time you
replace the label cassette.
To clean the cutter blade
1
2
3
when cleaning.
To clean the print head
1
2
3
.
8
Print head
cleaning tool
Figure 7
Remove the label cassette.
Press and hold the cutter button to expose the cutter
blade. See Figure 7.
Use a cotton ball and alcohol to clean both sides of
the blade.
The cutter blade is extremely sharp. Use caution
Remove the label cassette.
Remove the print head cleaning tool from inside the
label compartment cover. See Figure 7.
Gently wipe the padded side of the tool across the
print head.
Print head
Press
and hold