Dymo LabelMANAGER 450 사용자 설명서 - 페이지 14
{카테고리_이름} Dymo LabelMANAGER 450에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelMANAGER 450 17 페이지. Electronic labelmaker
Dymo LabelMANAGER 450에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지)
페이지 인쇄
Troubleshooting
Review the following possible solutions if you encounter a problem while using your labelmaker.
Problem/Error Message
No display
Poor Print Quality
Poor Cutter Performance
Printing
Too many characters
Exceeded maximum number of characters in buffer.
Too many lines
Exceeded maximum number of lines allowed.
Insert Tape Cassette
Tape cassette missing
Battery low
Batteries almost discharged.
Tape Jam
Motor is stalled due to tape jam.
Set
Fixed-length label selected and the length
necessary to print the label exceeds the selected
length.
If you still need assistance, contact DYMO Customer Support for your country. Refer to Contacting
Customer Support on the inside back cover to locate the contact number for your country.
Solution
• Ensure the labelmaker is turned on.
• Replace discharged batteries.
• Replace discharged batteries or attach power adapter.
• Ensure tape cassette is installed properly.
• Clean the print head.
• Replace the tape cassette.
Clean the cutter blade. See Caring for Your Labelmaker
No action required.
Message disappears when printing is finished.
Delete some or all of the buffer text.
Select another format.
Insert a new tape cassette
Replace batteries or connect AC power adapter.
• Remove jammed tape and replace tape cassette.
• Clean cutter blade.
• Following this message, a fixed-length value is
displayed which indicates the minimum label length
necessary to fit the text. Do one of the following:
• Adjust the fixed-length label setting appropriately, or
• Select a narrower font size.
.
15