GABOR FSM-M 사용자 설명서 - 페이지 16

{카테고리_이름} GABOR FSM-M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GABOR FSM-M 20 페이지. Full swing mount

Post-Installation Adjustment

Once your display is mounted on the wall bracket, you can ﬁne-tune adjustments to the horizontal level +3° to -3°, depth from the wall

1.8 to 20 inches, tilt +10° to -15°, and pivot 180°.

+3°

Horizontal Level

Loosen the three hex nuts with the included box-end wrench, and

adjust the horizontal level +3° to -3°. Use the bubble level to make

sure your display is level, then tighten the screws until secure.

-3°

Tilt Angle

Adjust the top and bottom tension screws to the desired friction

and tilt the display up or down +10° to -15°.

+10°

-15°