Dymo LabelManager 450D 사용자 설명서 - 페이지 14
{카테고리_이름} Dymo LabelManager 450D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelManager 450D 20 페이지. Dymo labelmanager user's guide
Dymo LabelManager 450D에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (20 페이지), 개요 (12 페이지), 빠른 시작 (4 페이지)
페이지 인쇄
Once you select a barcode type, that setting remains until you
select a different barcode type.
To insert a barcode
1.
Enter the text you wish to appear before the barcode on the
label. (Optional)
2.
Press
.
Preview
Insert
Insert Barcode and press
3.
Select
4.
Enter any text you wish to appear after the barcode.
(Optional)
5.
Press
.
1,2...n
Previewing Your Label
You can preview the text or format of your label prior to
printing. A two-line label is previewed as a single-line label.
To preview your label
1.
Press
+
.
Preview
Insert
Shift
Text or Format, and then press
2.
Select
If you select Text, the text of the label scrolls across the display.
If you select Format, the format selected displays briefly.
Aligning the Text
When you print a fixed length label you can choose to align
the text at the left, center, or right side of the label. For multi-
line labels, all lines of text are aligned left, center, and right
relative to each other.
To align the text
1.
Press
+
.
Shift
2.
Select the desired alignment and press
The alignment setting remains active until you reset the
alignment.
Changing the Cutting Option
You can choose to have each label automatically cut after
printing or you can manually cut the labels using the
By default, labels are cut automatically. When manual cutting
is selected and you print multiple copies or serialized labels, a
dotted cut-line is printed between each label.
14
H
.
H
.
H
.
key.
To change the cutting option
1.
Press
.
Settings
Set Auto Cut and press
2.
Select
3.
Select
On or Off, and then press
This setting will remain until you change it.
Adjusting the Print Contrast
You can adjust the print contrast to fine tune the print quality
of your label.
To set the contrast
1.
Press
.
Settings
Set Contrast and press
2.
Select
3.
Select a contrast setting and press
Using Label Maker Memory
The label maker has a powerful memory feature that stores
text and formatting as follows:
•
Automatically stores the last fifteen labels printed.
•
Allows you to store the text of up to ten labels you use
frequently.
•
Allows you to name and store up to ten commonly used
label formats.
Storing Label Text
The label maker automatically keeps the last fifteen labels
printed in a text buffer. In addition, you can store up to ten
specific labels you use frequently.
To store the current label text
1.
Press
.
Memory
Save and then press
2.
Select
3.
Use the arrow keys to select
fields, which represent memory locations, are displayed.
Fields that are filled indicate stored label text. You can
store new text in any of the memory locations. However,
if you select a location that is filled, the previous label text
will be overwritten.
4.
Select a memory location and press
Your label text is saved and you are returned to the label.
H
.
H
.
H
.
H
.
H
.
H
Label and then press
H
.
. Ten