GABOR Levitouch DM-550 사용자 설명서 - 페이지 12
{카테고리_이름} GABOR Levitouch DM-550에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GABOR Levitouch DM-550 17 페이지. Single arm monitor mount for 17 to 32 in. desktop computer monitors
페이지 인쇄
Balancing the Arm
You can adjust the arm tension to balance the arm according to the weight of your monitor.
1.
Remove the end cap from the arm to expose
the arm tension screw.
2.
With the monitor attached, hold the arm
horizontally so it's parallel with the desktop.
12
•
If the arm drops, tighten the arm tension screw by
turning it clockwise with hex key (O) until the monitor
stays in the horizontal position.
•
If the arm rises, loosen the arm tension screw by
turning it counterclockwise with hex key (O) until the
monitor stays in the horizontal position.
Important! Do not overtighten the tension screws.
To prevent damage to the tension indicator, never let the
red indicator line move beyond the + and – signs at the
ends of the indicator.
O
Tip: Always use one hand to support the monitor from
below while adjusting the arm tension.
3.
When the arm is balanced, replace the end cap.
O
1X