Dymo LabelWriter SE450 Label Printer 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Dymo LabelWriter SE450 Label Printer에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter SE450 Label Printer 12 페이지. Professional label printer for serial and usb connections

페이지 인쇄

Become familiar with the printer's major components. See Figure 2.

Top cover

Label spool

Label release

Label feed path

and tear bar

LabelWriter Printer Features

Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer

uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies

you will ever need to buy.

The form-feed button on the front of the printer advances a single label.

The status light visually shows the current state of the printer:

• Solid blue - USB cable is connected and printer is ready to print.

• Solid green - Serial cable is connected and printer is ready to print.

• Dimmed blue or green - printer is in power saving mode.

• Flashing red - Labels are not loaded properly or the label roll is empty.

• Flashing green - Printer is in configuration mode. Refer to the Technical Reference Guide.

Label roll

connector

channel

Form-feed button

and status light

Figure 2

Serial

USB

10101

24VDC

00000-0000000

S/N

Cable

DC power

connector

Serial number