GAC ESD-5550 Series 기술 정보

{카테고리_이름} GAC ESD-5550 Series에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. GAC ESD-5550 Series 12 페이지. Speed control unit
GAC ESD-5550 Series에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 매뉴얼 (8 페이지)

페이지 인쇄
GAC ESD-5550 Series 기술 정보
ESD-5550/5570 Series - Speed Control Unit
Table 1.
Starting Fuel
Control
ESD-5550
•
ESD-5555
•
ESD-5556
•
ESD-5570
•
INSTALLATION
The speed control unit is rugged enough to be placed in a control cabinet or engine mounted
enclosure with other dedicated control equipment. If water, mist, or condensation may come in
contact with the controller, it should be mounted vertically. This will allow the fluid to drain away
from the speed control unit. Extreme heat should be avoided.
An overspeed shutdown device, independent of the governor system, should be provided to
prevent loss of engine control, which may cause personal injury or equipment damage. Do not rely
exclusively on the governor system electric actuator to prevent overspeed.
A secondary shutoff device, such as a fuel solenoid, must be used.
Technical Information
ESD-5550/5570 Series Speed Control Units
Single Element
Speed
Speed Switch
Ramping
(Overspeed)
•
•
•
•
•
•
•
2 Element Speed
Switch
For Use with a
(Overspeed &
Light Force
Crank
Actuator
Termination)
•
•
•
Interator Wind-
Up Protection
•
•