GAC IGC700 Series 매뉴얼 - 페이지 11

{카테고리_이름} GAC IGC700 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAC IGC700 Series 18 페이지. Integral governor control

TIP: The longer you hold the + or - button down, the

faster the value will change.

Gain

Press and release the MENU button until Menu 0 is active,

then press the 1 button.

illuminate and the Bar Graph will display the current setting

of Gain. Use the +/- buttons to adjust the Gain parameter.

Stability

Press and release the MENU button until Menu 0 is active,

then press 2 button. The LED labeled STABILITY will

illuminate and the Bar Graph will display the current setting

of Stability. Use the +/- buttons to adjust the Stability

parameter.

Derivative

Press and release the MENU button until Menu 0 is active,

then press the 3 button. The LED labeled DERIVATIVE

will illuminate and the Bar Graph will display the current

setting of Derivative. Use the +/- buttons to adjust the

Derivative parameter.

Range Setting

This function will double or triple the Gain and Stability

parameter ranges by reducing the resolution. This is useful

when large amounts of gain and stability are needed. This

function basically multiplies the Gain and Stability

parameters by 1, 2 or 3. The normal setting for the Range is

1. By changing it to 2 or 3, the values are doubled or

tripled. To access Range adjustment press and release the

MENU button until Menu 2 is active, then press the 1

button. The current Range parameter setting will be flashed

on the Bar Graph as either 0,0,0,1 or 0,0,0,2 or 0,0,0,3. Use

the +/- buttons to adjust the Range. Again, do not press

ENTER.

Saving Values (While Engine is Running)

When all tuning and engine configuration is complete, press

and hold the RUN button to save all changes.

The LED labeled GAIN will