Dymo RhinoPRO 6000 사용자 설명서 - 페이지 14
{카테고리_이름} Dymo RhinoPRO 6000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo RhinoPRO 6000 17 페이지. Electronic labelmaker
Dymo RhinoPRO 6000에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
Display and indicators
LCD display —
see Fig. 4.
Tape widths
and display
formats
CASSETTE
14
The LCD includes a 'WYSIWYG' (What You See Is What You Get)
display. This feature enables you to see a representation of the
label you have created, before you print it.
The display also shows page break marks and indicator symbols to
confirm selections made using the function keys; these features
are not printed on the label.
• Justify: L = ranged left,
• Auto-scaling — see page 23.
The display adjusts the label format according to the width of label
tape selected. For 19mm (
For 12mm (
) and 6mm (
œ"
bands of shaded areas at the top and bottom of the display area:
12mm (
) tape display
œ"
If the label tape installed is of a different width from the label format
displayed, the shaded areas of the display will flash on and off to
warn you. You can continue to edit the label, but there will be no
response to the
Pressing
enables you select the correct label format to
CASSETTE
match the label tape width installed. Note, however, that the format
of your label may be altered when you select a different width.
Display window
T
= centred,
Fig. 4 — LCD display
) tape, the display will be full height.
"
) tapes, the display will be reduced by
´"
key.
PRINT
= ranged right.
6mm (
) tape display
´"
®
DYMO
6000 Labelmaker