Dymo 69110 빠른 시작 매뉴얼 - 페이지 7

{카테고리_이름} Dymo 69110에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo 69110 14 페이지. Dymo costar 400: quick start

4. Loading Labels

To load a label roll

Press the form-feed button to eject the labels that

protected the printer during shipment.

Open the top cover and remove any packing

material inside the label compartment.

Remove the label spool from inside the cover.

Hold the spool spindle in your left hand and place the

label roll on the spindle so that the labels feed from

underneath and the left edge of the label roll is flush

against the side of the spool. See Figure 7.

Place the spool guide onto the right side of the spool

and press the guide tightly against the side of the

label roll, leaving no gap between the roll and the spool. See Figure 8.

The label roll must fit snugly against both sides of the

NOTE

label spool, with no gaps, to avoid drifting as the labels feed

through the printer.

Insert the label spool into the slot in the printer cover with

the labels extending from underneath the roll. See Figure 9.

Spool

guide

spindle

Figure 7

Figure 8

Figure 9