Dymo LabelWriter 450 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Dymo LabelWriter 450에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 450 20 페이지. How to order and insert a roll of labels in the dymo labelwriter
Dymo LabelWriter 450에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 개요 (2 페이지), 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (10 페이지), 사용자 설명서 (19 페이지), 설치 매뉴얼 (16 페이지), 사용 설명서 (3 페이지)
페이지 인쇄
Slide the spool guide onto the right side of the spool and press
5
the guide tightly against the side of the label roll, leaving no gap
between the roll and the spool. See Figure 6.
To ensure proper feeding of labels during printing, the
NOTE
label roll must fit snugly against both sides of the label spool,
with no gaps.
Insert the label spool into the slot in the printer cover with the
6
labels extending from underneath the roll. See Figure 7.
Align the left edge of the label with the left edge of the label feed
7
slot and insert the label into the slot. See Figure 8.
The printer automatically feeds the label, stopping at the
beginning of the first label.
If the printer does not feed the labels, make sure
the first label is fully inserted and then press the
form-feed button.
If the first label on the roll is not a full label, press
the form-feed button to eject the partial label.
Slide the label guide to the left until the label guide
8
aligns with the right edge of the label. See Figure 8.
Make sure that the label guide does not pinch
the label.
Carefully lower the top cover.
9
6
Align labels
against left edge
Figure 6
Figure 7
Slide label
guide against
labels
Figure 8