Dymo LabelWriter 450 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Dymo LabelWriter 450에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 450 10 페이지. How to order and insert a roll of labels in the dymo labelwriter
Dymo LabelWriter 450에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (14 페이지), 개요 (2 페이지), 설정 매뉴얼 (11 페이지), 사용자 설명서 (19 페이지), 설치 매뉴얼 (16 페이지), 사용 설명서 (3 페이지)

페이지 인쇄

4. Loading Labels

To load a label roll

Press the form-feed button to eject the labels that

protected the printer during shipment.

Open the top cover and remove any packing

material inside the label compartment.

Remove the label spool from inside the cover.

Hold the spool spindle in your left hand and place the

label roll on the spindle so that the labels feed from

underneath and the left edge of the label roll is flush

against the side of the spool. See Figure 7.

Place the spool guide onto the right side of the spool

and press the guide tightly against the side of the

label roll, leaving no gap between the roll and the spool. See Figure 7.

The label roll must fit snugly against both sides of the

NOTE

label spool, with no gaps, to avoid drifting as the labels feed

through the printer.

Insert the label spool into the slot in the printer cover with

the labels extending from underneath the roll. See Figure 8.

PAGE 6 OF 10

H-1265

Spool

guide

spindle

Figure 7

Figure 8

1013 IH-1265