Dymo LabelWriter 450 Duo Label Printer 하드웨어 매뉴얼
{카테고리_이름} Dymo LabelWriter 450 Duo Label Printer에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 450 Duo Label Printer 2 페이지. Labelwriter series label printers
Dymo LabelWriter 450 Duo Label Printer에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (20 페이지), 개요 (2 페이지), 사용자 설명서 (19 페이지), 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
KnT Loading Dymo Labels 1
http://www.keepntrack.com/mediawiki/index.php/Loading_Printer_Labels_and_Paper
KeepnTrack - Hardware:
Loading Dymo Labels
(& Receipt Paper)
Learn how to load labels and receipt paper into your Dymo printer.
NOTE: This video shows the DYMO LabelWriter 450 Twin Turbo.
Setting Up
Be aware you should be using specific labels, the COMPanion
Yellow Badge Labels (part number V6101), or specific paper, the
Continuous Wide Student Pass Paper (part number V6301).
Open the printer by lifting the cover and remove any packing
materials.
After unpacking your printer and plugging it in, you should see two
blue lights in the front. These are called form-feed buttons. Press
them now to eject the protective labels.
You can also press the arrow buttons to remove the labels
backwards, or gently pull the labels through by hand.
Loading the Labels
Look inside the printer and you will see directions that will help
you with the next step.
Load the labels onto the spool with the labels feeding from below,
and with the little hole on the left.
Making sure that the roll is positioned tightly on the spool with no
gap between the roll and the spool.