Dymo LabelWriter 450 Turbo 설치 매뉴얼
{카테고리_이름} Dymo LabelWriter 450 Turbo에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 450 Turbo 4 페이지. How to order and insert a roll of labels in the dymo labelwriter
Dymo LabelWriter 450 Turbo에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (14 페이지), 개요 (2 페이지), 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (10 페이지), 사용자 설명서 (19 페이지), 사용 설명서 (3 페이지)
페이지 인쇄
Customer Guide
DYMO LabelWriter 450 Turbo Printer Installation
PASS
This is the process for installing a DYMO LabelWriter 450 Turbo printer on a PASS workstation
running PASS Ware or PACMED Server Plus. The process is the same for both applications.
Refer to the DYMO Quick Start Guide that came with your printer for instructions on loading
labels.
1.
Open the DYMO printer box and remove the printer, USB cable, power cord, power adapter, CD,
and Quick Start Guide.
A USB cable
B DYMO printer
C Power cord
2.
Connect the power and USB cables to the DYMO printer:
2.1
Connect the power cord to the power adapter.
2.2
Connect the power adapter cord to the power connection on the bottom of the printer,
then plug the power cord into an AC outlet.
2.3
Connect the square end of the USB cable into the USB port on the bottom of the printer.
©2014 Parata Systems, LLC
120-0493 Rev 01
D Power adapter
E Quick Start Guide
F CD
page 1 of 4
Parata Technical Assistance Center
1-888-PARATA1 (727-2821)