Dymo LabelWriter 4XL Label Printer 사용자 설명서 - 페이지 5
{카테고리_이름} Dymo LabelWriter 4XL Label Printer에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter 4XL Label Printer 20 페이지. Labelwriter series label printers
Dymo LabelWriter 4XL Label Printer에 대해서도 마찬가지입니다: 사양 (2 페이지), 개요 (2 페이지), 사용자 설명서 (19 페이지), 빠른 시작 매뉴얼 (9 페이지)
페이지 인쇄
About the LabelWriter 4XL Printer
Congratulations on purchasing a DYMO LabelWriter label printer. Your LabelWriter printer will
give you years of reliable label printing. We encourage you to take a few minutes to review how to
use and care for your printer.
Using the standard Windows and Mac OS printer drivers, you can print shipping labels with
Endicia software, print from standard Windows or Mac applications, or even integrate label
printing into your own custom applications. We have no doubt that the LabelWriter 4XL printer
will make your job easier and more efficient.
Printer Features
Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the
printer uses heat from a thermal print head to print on specially treated, heat-sensitive labels. Labels
are the only supplies you will ever need to buy.
Become familiar with the major components of the printer.
The form-feed button on the front of the printer advances a single label. The label eject button is
used to remove labels from the printer when changing rolls.
The status light visually shows the current state of the printer:
•
•
System Requirements
The LabelWriter printer requires a USB 1.1 or USB 2.0 connection and one of the following:
•
•
•
USB
connector
Cable
channel
Solid blue - power is on and the printer is ready.
Flashing blue - labels are not loaded properly or the label roll is empty.
®
Windows
XP 32-bit
®
Windows Vista
32 or 64-bit
®
Mac OS
v10.3.9/10.4.11/10.5.2 or later
Top
cover
Label roll
DC power
Platen
connector
release
Label exit slot
and tear bar
Form-feed
button and
status light
Chapter 1
Label
spool
Label eject
button
1