Gacell CT-7000 사용자 설명서 - 페이지 6
{카테고리_이름} Gacell CT-7000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gacell CT-7000 12 페이지.
페이지 인쇄
12V AGM+
(Hold Mode
button for 3
seconds to
enter)
12V LITHIUM
(Hold & Press)
REPAIR (Hold
& Press)
13.6V SUPPLY
(Hold & Press)
These "Hold or / and Press" modes are advanced charging modes that
require your full attention before selecting.
Using 12V AGM+ (Hold)
This mode is designed for 12V advanced AGM batteries only. Advanced
AGM batteries are typically found in startstop micro-hybrid vehicles.
These batteries accept a higher than normal charging voltage. 12V
AGM+ charge mode is NOT suitable for traditional AGM batteries.
Consult the battery manufacturer before using this mode.
Using 12V LITHIUM (Hold & Press)
This mode is designed for 12V lithium-ion batteries only, including
LiFePO4. Some lithium-ion batteries may be unstable and unsuitable for
charging. Consult the lithium battery manufacturer before charging and
ask for recommended charging voltage and current.
Using REPAIR (Hold & Press)
This mode is for LEAD-ACID batteries only. It is an advanced battery
recovery mode for repairing old, idle, stratified or sulfated batteries.
NOT all batteries can be recovered. For optimal results, take the battery
through a full charge cycle, bringing the battery to full charge, before
using this mode. When this mode is chosen, do remember press Mode
Charging 12V advanced AGM batteries that
14-230
requires a higher than normal charging
voltage (Blue LED)
Charging 12V lithium-ion batteries only,
14-230
including LiFePO4 (White LED)
An advanced battery recovery mode for
repairing old, idle, stratified or sulfated
14-230
batteries. REPAIR Yellow LED + 12V/24
mode LEDs
Converting to a DC power supply for
powering 12V DC device or as a memory
–––
retainer when replacing a battery (Yellow
LED)
5