Dymo LabelWriter Twin Turbo 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Dymo LabelWriter Twin Turbo에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dymo LabelWriter Twin Turbo 8 페이지. Dymo labelwriter twin turbo: product brochure
Dymo LabelWriter Twin Turbo에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (15 페이지), 브로셔 (2 페이지)

페이지 인쇄

4. Loading Labels

1 Press the form-feed button to eject the labels that protected the printer during

shipment.

2 Open the top cover and remove the label spool from one side of the printer.

3 Hold the spool spindle in your left hand and

place the label roll on the spindle so that the

labels feed from underneath.

4 Place the spool guide on the right side of the

spool and adjust it to fit snugly against the roll.

See Figure 7.

5 Insert the label spool into the slots in the

printer cover.

6 Cut the first label in half so that you have a

clean edge and insert the label into the label

feed slot. See Figure 8.

The printer feeds the labels, stopping at the

beginning of the first label. If the printer stops

without feeding the label, make sure the label

is fully inserted and then press the form-feed

button.

Repeat these steps to load the second roll of

labels.

7 Close the top cover.

You are now ready to print your first label.

Figure 7

Figure 8