DAW Industries TGK-4P10 매뉴얼 - 페이지 4
{카테고리_이름} DAW Industries TGK-4P10에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DAW Industries TGK-4P10 10 페이지.
페이지 인쇄2
True-KD
Series
™
Knee Connection to KD Adapter (TSC-KDL)
The instructions below apply to True-KD
using the KD Adapter (TSC-KDL):
After lamination of the KD Adapter (TSC-KDL) is complete,
A. Use the included
7
/
Bolt to remove the black Spacer from the
16
center of the top of the knee .
Spacer
7
/
Bolt
16
B. Remove the Kneecap .
C. Flex the 4P10 KD
™
True-KD Knee approx . 90-degrees .
D. Select your desired degree of external knee rotation .
Each notch of the KD Adapter and knee top is an adjustment
of 2 degrees .
E. Secure the knee to the KD Adapter using the included
7 /
16 Bolt (8mm hex) . Torque the bolt to 9ft-lb (12.2Nm).
DAW
®
DAW
Industries
© Copyright 2021, DAW Industries, San Diego, CA - All Rights Reserved 01082021
™
Series Knees, when
Spacer
7
/
16
Lock Washer
7
/
Bolt
16
(8mm hex)
For Technical Support call (800)242-8669
Bolt
DAW
®
DAW
Industries
For Technical Support call (800)242-8669
© Copyright 2021, DAW Industries, San Diego, CA - All Rights Reserved 01082021
15
Patient Notes